Hc 05 vs. hc 06

Hc-05 is a Bluetooth serial port module with master-slave integration. The master-slave can be switched with rich and complete instructions. Hc-06 is a Bluetooth serial port module with master-slave integration. The master-slave can be switched by...
  • Safe
  • Encrypted

Trends
HC-06 is an excellent choice if you need a straightforward Bluetooth module for simple projects, especially if you don't require the ability to initiate connections. It's user-friendly and budget-friendly. HC-05 is the right option if you need...
  • Safe
  • Encrypted

HC-06 also has the same exact pin layout as HC-05, with Key and State pin being optional depending on the module/vendor of the device. 1. This pin is used to bring the Bluetooth module in AT commands mode. The Key/EN pin should be high to operate...
The HC-06 is a Bluetooth 2.0 module, while the HC-05 is a Bluetooth 4.0 module. The HC-06 can only communicate with devices that are also Bluetooth 2.0 compatible, while the HC-05 can communicate with both Bluetooth 2.0 and Bluetooth 4.0 compatible...
The HC-05 and HC-06 Bluetooth modules are most established ones in the world of microcontrollers. They are available for about 8 euros from Amazon or online electronics shops. In addition to HC-05 and HC-06, you might come across hc-08 and HM-10...
  • Safe
  • Encrypted

The HC-05 Bluetooth module has a 3.3 V level for RX/TX and the microcontroller can detect 3.3 V level, so, there is no need to shift the TX voltage level of the HC-05 module. But we need to shift the transmit voltage level from the microcontroller to RX...
  • Safe
  • Encrypted

The HC-05 zs-040 and the HC-06 zs-040 use the the same breakout board (even have the same screen print) but have some noticeable differences: - the HC-06 does not have a button switch. - the HC-06 only 4 header pins. - the HC-06 does not have pins 31-34...
Step-By-Step Instructions To Connect HC-05 Bluetooth Module To An Arduino. I will show you how to connect your HC-05 module to an Arduino UNO in a few simple steps. HC05 module comes with a 2.54 mm bergstick connector. You can use a male-to-female...
The HC-05 module connects to ESP32 or Arduino UNO via serial pins. You can configure the HC-05 module using AT commands. To enter the AT command mode, pull the KEY pin of the module low. Once in AT command mode, you can set the name, PIN code, baud...
Everything You Need to Know About HC-06 in Electronics HC-06 vs. HC-05 . The HC-05 module may be a slave or master, which implies that HC-05 is able to initiate the connection with another device. The HC-06 is only a slave, which means it is able to...
  • Safe
  • Encrypted

See more