Home 
How Blumble Works 
Search Algorithm 
Your Privacy 
About 
Facebook
Twitter
Blog
Most recent job postings at 8b
via Glassdoor
posted_at: 21 days agoschedule_type: Full-time
The employee shall obtain and maintain designation as a Collateral Duty Inspector (CDI) for the below Support Equipment. You will acquire designation/certification as Hydraulic Contamination, HAZMAT, Tire and Wheel certification, and certifications as deemed necessary by the COR. The GSE contractor shall test, troubleshoot, install, remove, inspect, and repair, align/rig systems components and... ancillary equipment as directed by the work center
The employee shall obtain and maintain designation as a Collateral Duty Inspector (CDI) for the below Support Equipment. You will acquire designation/certification as Hydraulic Contamination, HAZMAT, Tire and Wheel certification, and certifications as deemed necessary by the COR. The GSE contractor shall test, troubleshoot, install, remove, inspect, and repair, align/rig systems components and... ancillary equipment as directed by the work center supervisor for the following Ground Support Equipment:
A/S32A-45, Mid-Range Tow Tractor, (PN) 10-10-0001
Mobile Electric Power Plant, NC-10, (PN) 328AS100-1
A/M32A-108, Mobile Electric Power Plant, NC-108, (PN) 328AS100-3
A/M24M-6, Trailer Mounted Electric Power Plant, (PN) C637
ACU-24/M, Portable Air Compressor Unit, (PN) 530-1813
A/M27T-15, Diesel Hydraulic Power Supply (PN) 040489-100
A/M32T-6, Cabin Leakage Tester (PN) 93038-100-AV-8
Water Demineralization Trailer (PN) 75D110065-1007
A/U47A-5, Mobile Air Start Unit, (PN) 4505453
A/M42M-2A, Portable Floodlight Set, (PN) 3573AS100-1
A/S32A-44, Aircraft Utility Crane, (PN) 9319-010, 9319-011
Aircraft Tow Bar 22FT ALBAR (PN) 1479AS500-1
MODELS 3000 A, B, AND H, Engine Transportation Trailer, 3 Thousand Trailer,
(PN) 105021, 104904, and 107889
B4 Stand Aircraft Maintenance Stand, (PN) 54J6345
A/S32M-19, 25T Wheel Mounted Heavy Maintenance Crane, (TEREX), (PN) CD 225 HMC
A/S32K-1E, Air-Launched Weapons Loader, (SATS Loader), (PN) 3772AS100-1
4T Portable Floor Crane, (Cobra Crane), (PN) 75D110080-1001
Liquid Coolant Filtration Unit, (PN) LCFU-2AC-302-8, LCFU-2AC-302-9
A/M32M-40, Small Corrosion Control Cart, (PN) 051497-100
The contractor will perform scheduled and unscheduled maintenance on Ground Support Equipment (GSE) and squadron SEPMS assigned to the MALS for repair and/or inspections.
You will inspect, Diagnose, and Test GSE to determine equipment serviceability and proper operation. Clean and treats for corrosion.
Service equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.
Diagnose mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Stencils and marks GSE by technical publications
Train and advise contractors and other workers on diagnosis and repair maintenance problems.
Have knowledge of:
Applicable Publications, Diagrams, Sketches, and Drawings
Applicable Precision Measuring Equipment
Applicable knowledge of aircraft ground handling and common maintenance practices.
Ground Support Equipment Mechanics shall be a CDI with the capability of performing all tasks on all systems.
• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c Show more details...
A/S32A-45, Mid-Range Tow Tractor, (PN) 10-10-0001
Mobile Electric Power Plant, NC-10, (PN) 328AS100-1
A/M32A-108, Mobile Electric Power Plant, NC-108, (PN) 328AS100-3
A/M24M-6, Trailer Mounted Electric Power Plant, (PN) C637
ACU-24/M, Portable Air Compressor Unit, (PN) 530-1813
A/M27T-15, Diesel Hydraulic Power Supply (PN) 040489-100
A/M32T-6, Cabin Leakage Tester (PN) 93038-100-AV-8
Water Demineralization Trailer (PN) 75D110065-1007
A/U47A-5, Mobile Air Start Unit, (PN) 4505453
A/M42M-2A, Portable Floodlight Set, (PN) 3573AS100-1
A/S32A-44, Aircraft Utility Crane, (PN) 9319-010, 9319-011
Aircraft Tow Bar 22FT ALBAR (PN) 1479AS500-1
MODELS 3000 A, B, AND H, Engine Transportation Trailer, 3 Thousand Trailer,
(PN) 105021, 104904, and 107889
B4 Stand Aircraft Maintenance Stand, (PN) 54J6345
A/S32M-19, 25T Wheel Mounted Heavy Maintenance Crane, (TEREX), (PN) CD 225 HMC
A/S32K-1E, Air-Launched Weapons Loader, (SATS Loader), (PN) 3772AS100-1
4T Portable Floor Crane, (Cobra Crane), (PN) 75D110080-1001
Liquid Coolant Filtration Unit, (PN) LCFU-2AC-302-8, LCFU-2AC-302-9
A/M32M-40, Small Corrosion Control Cart, (PN) 051497-100
The contractor will perform scheduled and unscheduled maintenance on Ground Support Equipment (GSE) and squadron SEPMS assigned to the MALS for repair and/or inspections.
You will inspect, Diagnose, and Test GSE to determine equipment serviceability and proper operation. Clean and treats for corrosion.
Service equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.
Diagnose mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Stencils and marks GSE by technical publications
Train and advise contractors and other workers on diagnosis and repair maintenance problems.
Have knowledge of:
Applicable Publications, Diagrams, Sketches, and Drawings
Applicable Precision Measuring Equipment
Applicable knowledge of aircraft ground handling and common maintenance practices.
Ground Support Equipment Mechanics shall be a CDI with the capability of performing all tasks on all systems.
• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c Show more details...
via JSfirm.com
schedule_type: Full-time
AV-8B Airframes Mechanic
Description: Services, repairs, and overhauls aircraft to ensure airworthiness. Repairs replace and rebuild aircraft structures of moderate difficulties, such as wings, fuselage, surface controls, and functional components including rigging, plumbing, and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding... equipment, rivet guns, and drills. Reads and interprets
AV-8B Airframes Mechanic
Description: Services, repairs, and overhauls aircraft to ensure airworthiness. Repairs replace and rebuild aircraft structures of moderate difficulties, such as wings, fuselage, surface controls, and functional components including rigging, plumbing, and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding... equipment, rivet guns, and drills. Reads and interprets manufacturers publications, maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Inspects airframe components for fluid leaks, cracks, and other damage. Troubleshoot, remove, replace, and repair aircraft structural and hydraulic system components. Perform miscellaneous duties to service aircraft systems. As required by site operations and site management, be certified as a CDI. Shall be able to correctly prioritize workload to maintain schedules and maintenance standards on assigned projects Show more details...
Description: Services, repairs, and overhauls aircraft to ensure airworthiness. Repairs replace and rebuild aircraft structures of moderate difficulties, such as wings, fuselage, surface controls, and functional components including rigging, plumbing, and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding... equipment, rivet guns, and drills. Reads and interprets manufacturers publications, maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Inspects airframe components for fluid leaks, cracks, and other damage. Troubleshoot, remove, replace, and repair aircraft structural and hydraulic system components. Perform miscellaneous duties to service aircraft systems. As required by site operations and site management, be certified as a CDI. Shall be able to correctly prioritize workload to maintain schedules and maintenance standards on assigned projects Show more details...
via Greenhouse
schedule_type: Full-time
Pulse is searching for a dependable Band 8b Clinical/counselling Psychologist to be welcomed into our client’s Adult LD team within a hospital based in North London. This position will be available for the assigned Clinical Psychologist to start as soon as possible, working full-time hours each week for an ongoing period.
The post holder in this role will have the opportunity to significantly... impact the lives of adults with learning difficulties.
Pulse is searching for a dependable Band 8b Clinical/counselling Psychologist to be welcomed into our client’s Adult LD team within a hospital based in North London. This position will be available for the assigned Clinical Psychologist to start as soon as possible, working full-time hours each week for an ongoing period.
The post holder in this role will have the opportunity to significantly... impact the lives of adults with learning difficulties. As a crucial team member, The post holder will provide clinical expertise, assessment, and therapeutic interventions to support individuals.
To be considered for this role, you must:
• Hold a doctorate in Clinical Psychology
• Be HCPC registered
• Have a proven track record in adult LD
• Be analytical and show good attention to detail
What next?
If you are a patient and empathetic Psychologist with a keen interest in helping adults with mental health conditions, please apply today or contact our team for more information.
Benefits of locum work:
• Daily payroll
• Variety of work opportunities in NHS and private sectors
• Expand your skill set more quickly
• Flexible hours of work
Why Pulse?
• Online interviews via HireVue
• First class support and advice from our specialist consultant teams
• iPoint – Electronic Timesheet smartphone app
• Assistance with travel and finding accommodation
• Streamlined compliance process, utilising new online technology
• Access to high-quality voluntary training
• £300 Recommend a Friend bonus scheme*
• Terms and conditions Show more details...
The post holder in this role will have the opportunity to significantly... impact the lives of adults with learning difficulties. As a crucial team member, The post holder will provide clinical expertise, assessment, and therapeutic interventions to support individuals.
To be considered for this role, you must:
• Hold a doctorate in Clinical Psychology
• Be HCPC registered
• Have a proven track record in adult LD
• Be analytical and show good attention to detail
What next?
If you are a patient and empathetic Psychologist with a keen interest in helping adults with mental health conditions, please apply today or contact our team for more information.
Benefits of locum work:
• Daily payroll
• Variety of work opportunities in NHS and private sectors
• Expand your skill set more quickly
• Flexible hours of work
Why Pulse?
• Online interviews via HireVue
• First class support and advice from our specialist consultant teams
• iPoint – Electronic Timesheet smartphone app
• Assistance with travel and finding accommodation
• Streamlined compliance process, utilising new online technology
• Access to high-quality voluntary training
• £300 Recommend a Friend bonus scheme*
• Terms and conditions Show more details...
via Aviation Job Search
schedule_type: Full-time
The Quality Assurance Safety Observer Aircraft Mechanic II AV-8B maintain and service aircraft armament equipment, upload, download of ordnance stores/devices and performance of systems tests/checks as required.
Functions...
• Must be able to function as assistant ordinance crew leader, quality assurance safety observer (QASO) to ensure all operations are performed safely and correctly in support of NAWSCL, NWTSCL Research, Test, Development and
The Quality Assurance Safety Observer Aircraft Mechanic II AV-8B maintain and service aircraft armament equipment, upload, download of ordnance stores/devices and performance of systems tests/checks as required.
Functions...
• Must be able to function as assistant ordinance crew leader, quality assurance safety observer (QASO) to ensure all operations are performed safely and correctly in support of NAWSCL, NWTSCL Research, Test, Development and Evaluation) (RTD & E programs at the “O” level maintenance on the following aircraft. (AV-8B, F/A-18 (Series), & H-60).
• Coordinates and facilitates the assembly, installation, and adjusts aircraft armament parts, assemblies and accessories according to specifications, using technical directives, applicable publications, hand tools, power tools and measuring instruments.
• Attach armament systems and components to aircraft, tests functional performance of installed ordinance, equipment and armament components, adjusts repairs or replaces unacceptable components.
• Prepare and load live ammunition and ordnance, as well as download unused ordnance after mission completion.
• Shall maintain and verify the daily aircraft ordnance load/fly-me requests in accordance with the Daily Flight Schedule for proper configuration and weapon system compatibility in accordance with the US Navy AV8-B Aircraft Tactical Manual.
• May require OJT/qualifications on other aircraft as operational commitments dictate.
Minimum Education and Experience Required:
• Must have completed USN / USMC Aviation Ordnance (AO) “C” school, training for F/A-18 (Series) / AV-8B aircraft, and conventional weapons loading school.
• Six (6) years hands-on experience may be substituted for AO “A” school.
• Must have ten 10) years’ experience in Organizational experience supervising the loading and arming of all types of conventional ordnance on aircraft, five (5) of which must have been within the last eight (8) years at the organizational level.
• Not less than three (3) years T/M/S specific experience for the aircraft hired to maintain.
• Must be certifiable to supervise conventional/experimental ordnance loading. Shall be able to evaluate developmental/interim loading/downloading procedures/checklists.
• Must be able to maintain all required records to meet Navy standards for “O” level ordnance shops.
• Must be capable of being certified as a CDI, Two (2) years T/M/S experience within the last three (3) years preferred.
• High School graduate or equivalent.
• Must have a valid driver’s license.
• Must have a current, active valid U.S. Secret level clearance and be able to maintain it.
• Must be available to work any shift.
Physical/Working Environment
• May work in aircraft maintenance hangar or outside.
• May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.
• May be exposed to extreme noise from turbine and jet engine aircraft.
• May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.
• Must be able to perform tasks on, under, in and around aircraft.
• May be required to lift up to 50 pounds.
Hourly $45.2 USD
• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
Looking for Aircraft Mechanic jobs in UK?
Browse hundreds of latest Aircraft Mechanic vacancies updated daily on one of the UK's top aviation job sites. Aviation Job Search prides itself in helping thousands of people build their Aircraft Mechanic careers in UK.
Click below link to browse other Aircraft Mechanic opportunities in UK:
View all Aircraft Mechanic Jobs
If you're an employer looking for Aircraft Mechanic recruitment, get in touch with us by clicking on the link below:
Hire Aircraft Mechanic Now Show more details...
Functions...
• Must be able to function as assistant ordinance crew leader, quality assurance safety observer (QASO) to ensure all operations are performed safely and correctly in support of NAWSCL, NWTSCL Research, Test, Development and Evaluation) (RTD & E programs at the “O” level maintenance on the following aircraft. (AV-8B, F/A-18 (Series), & H-60).
• Coordinates and facilitates the assembly, installation, and adjusts aircraft armament parts, assemblies and accessories according to specifications, using technical directives, applicable publications, hand tools, power tools and measuring instruments.
• Attach armament systems and components to aircraft, tests functional performance of installed ordinance, equipment and armament components, adjusts repairs or replaces unacceptable components.
• Prepare and load live ammunition and ordnance, as well as download unused ordnance after mission completion.
• Shall maintain and verify the daily aircraft ordnance load/fly-me requests in accordance with the Daily Flight Schedule for proper configuration and weapon system compatibility in accordance with the US Navy AV8-B Aircraft Tactical Manual.
• May require OJT/qualifications on other aircraft as operational commitments dictate.
Minimum Education and Experience Required:
• Must have completed USN / USMC Aviation Ordnance (AO) “C” school, training for F/A-18 (Series) / AV-8B aircraft, and conventional weapons loading school.
• Six (6) years hands-on experience may be substituted for AO “A” school.
• Must have ten 10) years’ experience in Organizational experience supervising the loading and arming of all types of conventional ordnance on aircraft, five (5) of which must have been within the last eight (8) years at the organizational level.
• Not less than three (3) years T/M/S specific experience for the aircraft hired to maintain.
• Must be certifiable to supervise conventional/experimental ordnance loading. Shall be able to evaluate developmental/interim loading/downloading procedures/checklists.
• Must be able to maintain all required records to meet Navy standards for “O” level ordnance shops.
• Must be capable of being certified as a CDI, Two (2) years T/M/S experience within the last three (3) years preferred.
• High School graduate or equivalent.
• Must have a valid driver’s license.
• Must have a current, active valid U.S. Secret level clearance and be able to maintain it.
• Must be available to work any shift.
Physical/Working Environment
• May work in aircraft maintenance hangar or outside.
• May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.
• May be exposed to extreme noise from turbine and jet engine aircraft.
• May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.
• Must be able to perform tasks on, under, in and around aircraft.
• May be required to lift up to 50 pounds.
Hourly $45.2 USD
• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
Looking for Aircraft Mechanic jobs in UK?
Browse hundreds of latest Aircraft Mechanic vacancies updated daily on one of the UK's top aviation job sites. Aviation Job Search prides itself in helping thousands of people build their Aircraft Mechanic careers in UK.
Click below link to browse other Aircraft Mechanic opportunities in UK:
View all Aircraft Mechanic Jobs
If you're an employer looking for Aircraft Mechanic recruitment, get in touch with us by clicking on the link below:
Hire Aircraft Mechanic Now Show more details...
via Talent.com
posted_at: 3 days agoschedule_type: Full-time
Apply for Position : Deputy Radiotherapy Services Manager
Job reference : 359-DP10567 Employer : Maidstone and Tunbridge Wells NHS Trust How you'll apply for this job
We're updating the design of NHS Jobs and the way you apply.
This means you'll apply for this job through a new updated version of the website.
If you've already got an NHS Jobs account
You'll need to create a new NHS Jobs account and apply for this job through the new version.
You'll
Apply for Position : Deputy Radiotherapy Services Manager
Job reference : 359-DP10567 Employer : Maidstone and Tunbridge Wells NHS Trust How you'll apply for this job
We're updating the design of NHS Jobs and the way you apply.
This means you'll apply for this job through a new updated version of the website.
If you've already got an NHS Jobs account
You'll need to create a new NHS Jobs account and apply for this job through the new version.
You'll still have access to your current NHS Jobs account. For example, you can sign in and view your profile, your applications, and you can copy and paste any information from there into your new account, if you need to.
You'll have these 2 accounts while there's a 'current' and 'new' version of the website. Your new account will replace your current account when the website design is fully updated.
If you've not got an NHS Jobs account
You'll need to continue and create one to apply for this job.
If you want to access the website in... Welsh
Last updated : 2024-03-19 Show more details...
Job reference : 359-DP10567 Employer : Maidstone and Tunbridge Wells NHS Trust How you'll apply for this job
We're updating the design of NHS Jobs and the way you apply.
This means you'll apply for this job through a new updated version of the website.
If you've already got an NHS Jobs account
You'll need to create a new NHS Jobs account and apply for this job through the new version.
You'll still have access to your current NHS Jobs account. For example, you can sign in and view your profile, your applications, and you can copy and paste any information from there into your new account, if you need to.
You'll have these 2 accounts while there's a 'current' and 'new' version of the website. Your new account will replace your current account when the website design is fully updated.
If you've not got an NHS Jobs account
You'll need to continue and create one to apply for this job.
If you want to access the website in... Welsh
Last updated : 2024-03-19 Show more details...
via LinkedIn
schedule_type: Full-time
The Employee Shall Obtain And Maintain Designation As a Collateral Duty Inspector (CDI) For The Below Support Equipment. You Will Acquire Designation/certification As Hydraulic Contamination, HAZMAT, Tire And Wheel Certification, And Certifications As Deemed Necessary By The COR. The GSE Contractor Shall Test, Troubleshoot, Install, Remove, Inspect, And Repair, Align/rig Systems Components And... Ancillary Equipment As Directed By The Work Center
The Employee Shall Obtain And Maintain Designation As a Collateral Duty Inspector (CDI) For The Below Support Equipment. You Will Acquire Designation/certification As Hydraulic Contamination, HAZMAT, Tire And Wheel Certification, And Certifications As Deemed Necessary By The COR. The GSE Contractor Shall Test, Troubleshoot, Install, Remove, Inspect, And Repair, Align/rig Systems Components And... Ancillary Equipment As Directed By The Work Center Supervisor For The Following Ground Support Equipment
A/S32A-45, Mid-Range Tow Tractor, (PN) 10-10-0001
Mobile Electric Power Plant, NC-10, (PN) 328AS100-1
A/M32A-108, Mobile Electric Power Plant, NC-108, (PN) 328AS100-3
A/M24M-6, Trailer Mounted Electric Power Plant, (PN) C637
ACU-24/M, Portable Air Compressor Unit, (PN) 530-1813
A/M27T-15, Diesel Hydraulic Power Supply (PN) 040489-100
A/M32T-6, Cabin Leakage Tester (PN) 93038-100-AV-8
Water Demineralization Trailer (PN) 75D110065-1007
A/U47A-5, Mobile Air Start Unit, (PN) 4505453
A/M42M-2A, Portable Floodlight Set, (PN) 3573AS100-1
A/S32A-44, Aircraft Utility Crane, (PN) 9319-010, 9319-011
Aircraft Tow Bar 22FT ALBAR (PN) 1479AS500-1
MODELS 3000 A, B, AND H, Engine Transportation Trailer, 3 Thousand Trailer,
(PN) 105021, 104904, and 107889
B4 Stand Aircraft Maintenance Stand, (PN) 54J6345
A/S32M-19, 25T Wheel Mounted Heavy Maintenance Crane, (TEREX), (PN) CD 225 HMC
A/S32K-1E, Air-Launched Weapons Loader, (SATS Loader), (PN) 3772AS100-1
4T Portable Floor Crane, (Cobra Crane), (PN) 75D110080-1001
Liquid Coolant Filtration Unit, (PN) LCFU-2AC-302-8, LCFU-2AC-302-9
A/M32M-40, Small Corrosion Control Cart, (PN) 051497-100
The contractor will perform scheduled and unscheduled maintenance on Ground Support Equipment (GSE) and squadron SEPMS assigned to the MALS for repair and/or inspections.
You will inspect, Diagnose, and Test GSE to determine equipment serviceability and proper operation. Clean and treats for corrosion.
Service equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.
Diagnose mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Stencils and marks GSE by technical publications
Train and advise contractors and other workers on diagnosis and repair maintenance problems.
Have Knowledge Of
Applicable Publications, Diagrams, Sketches, and Drawings
Applicable Precision Measuring Equipment
Applicable knowledge of aircraft ground handling and common maintenance practices.
Ground Support Equipment Mechanics shall be a CDI with the capability of performing all tasks on all systems.
• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans Show more details...
A/S32A-45, Mid-Range Tow Tractor, (PN) 10-10-0001
Mobile Electric Power Plant, NC-10, (PN) 328AS100-1
A/M32A-108, Mobile Electric Power Plant, NC-108, (PN) 328AS100-3
A/M24M-6, Trailer Mounted Electric Power Plant, (PN) C637
ACU-24/M, Portable Air Compressor Unit, (PN) 530-1813
A/M27T-15, Diesel Hydraulic Power Supply (PN) 040489-100
A/M32T-6, Cabin Leakage Tester (PN) 93038-100-AV-8
Water Demineralization Trailer (PN) 75D110065-1007
A/U47A-5, Mobile Air Start Unit, (PN) 4505453
A/M42M-2A, Portable Floodlight Set, (PN) 3573AS100-1
A/S32A-44, Aircraft Utility Crane, (PN) 9319-010, 9319-011
Aircraft Tow Bar 22FT ALBAR (PN) 1479AS500-1
MODELS 3000 A, B, AND H, Engine Transportation Trailer, 3 Thousand Trailer,
(PN) 105021, 104904, and 107889
B4 Stand Aircraft Maintenance Stand, (PN) 54J6345
A/S32M-19, 25T Wheel Mounted Heavy Maintenance Crane, (TEREX), (PN) CD 225 HMC
A/S32K-1E, Air-Launched Weapons Loader, (SATS Loader), (PN) 3772AS100-1
4T Portable Floor Crane, (Cobra Crane), (PN) 75D110080-1001
Liquid Coolant Filtration Unit, (PN) LCFU-2AC-302-8, LCFU-2AC-302-9
A/M32M-40, Small Corrosion Control Cart, (PN) 051497-100
The contractor will perform scheduled and unscheduled maintenance on Ground Support Equipment (GSE) and squadron SEPMS assigned to the MALS for repair and/or inspections.
You will inspect, Diagnose, and Test GSE to determine equipment serviceability and proper operation. Clean and treats for corrosion.
Service equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.
Diagnose mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Stencils and marks GSE by technical publications
Train and advise contractors and other workers on diagnosis and repair maintenance problems.
Have Knowledge Of
Applicable Publications, Diagrams, Sketches, and Drawings
Applicable Precision Measuring Equipment
Applicable knowledge of aircraft ground handling and common maintenance practices.
Ground Support Equipment Mechanics shall be a CDI with the capability of performing all tasks on all systems.
• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans Show more details...
via CareerBuilder
posted_at: 8 days agoschedule_type: Full-time and Part-time
Deputy Head of Nuclear Medicine Physics: Molecular Radiotherapy Lead
Radiation Physics are recruiting a Deputy Head of Nuclear Medicine Physics. We are looking for an experienced person in nuclear medicine imaging and molecular radiotherapy to lead our busy molecular radiotherapy service...
The successful candidate will be an HCPC registered clinical scientist, a certificated MPE with extensive relevant experience. We are looking for someone who
Deputy Head of Nuclear Medicine Physics: Molecular Radiotherapy Lead
Radiation Physics are recruiting a Deputy Head of Nuclear Medicine Physics. We are looking for an experienced person in nuclear medicine imaging and molecular radiotherapy to lead our busy molecular radiotherapy service...
The successful candidate will be an HCPC registered clinical scientist, a certificated MPE with extensive relevant experience. We are looking for someone who could act as an RPA or RWA however support will be given for promising individuals to obtain one or more of these within an agreed timeframe.
We provide a clinical, scientific and technical service to the Diagnostic and Oncology Directorates of the Maidstone and Tunbridge Wells NHS Trust at both Maidstone and Tunbridge Wells sites and to other Departments of the Trust as required. The Section provides a Molecular Radiotherapy Service and provision for support to PET-CT.
The department provides training across all disciplines and levels. The department supports staff undertaking HSST, STP and RCT (and equivalences) or working towards professional certifications.
There may be opportunities to be involved in Radiation Safety activities across the wider Radiation Physics group should the post holder be interested in this."
Main duties of the job
The post holder will work alongside the Nuclear Medicine Physics team to ensure that all radiation practices within the Nuclear Medicine Departments at MTW comply with regulatory requirements, national guidance and best practice.
They will use their own professional judgement when providing complex, wide-ranging expert advice to clinical staff on the optimisation of patient imaging, quality assurance, radiation dosimetry, radiation safety and the interpretation of scientific results. The highly-specialist, complex and advanced nature of this expert advice may mean that there is no immediate recourse to another clinical scientist.
In particular, the post holder will be expected to lead the molecular radiotherapy programme, including running the established services (which currently routinely includes Ra-223 Xofigo, I-131 ablation and thyrotoxicosis therapies, and occasional Lu-177 Dotatate with a view to establishing a Lu-177 PSMA service in the near future) and working with the Head of Nuclear Medicine Physics and Head of Radiation Physics where required to continually develop the services, including introduction of novel therapies where appropriate.
About us
Maidstone and Tunbridge Wells NHS Trust is a large acute hospital Trust in the county of Kent.
The Trust provides a full range of general hospital services and some areas of specialist complex care to around 760,000 people living in the south part of West Kent and the north part of East Sussex.
The Trust's core catchment areas are Maidstone and Tunbridge Wells and their surrounding boroughs. We work from two main clinical sites: Maidstone Hospital and Tunbridge Wells Hospital at Pembury. Tunbridge Wells Hospital opened in 2011 and provides single rooms with en-suites for all in-patients - the first of its kind in the country.
We employ more than 7,000 full and part-time staff in a huge range of clinical and non-clinical roles across both of our hospital sites.
Job responsibilities
Once your pre-employment checks have been completed you will be contacted by Recruitment to arrange your start date which will be in line with one of our Corporate Inductions.
Please note that appointment to this post will be subject to a satisfactory Disclosure & Barring Service Check at StandardLevel. (Enhanced level now includes regulated checks against vulnerable adults and children)
At MTW, we seek to develop a culture where everyone can reach their full potential with opportunities to grow and develop their career. We recognise and value the unique contributions that each of our staff bring, delivering the best quality care and service to our patients. We are committed to being a diverse employer and strive to reflect everyone in our local communities. We welcome applications from people of diverse backgrounds, perspectives and experiences and celebrate the diversity of thought, viewpoints and ideas that will make our Trust the best place to work.
Interview Date: To be confirmed
Person Specification
Qualifications
• 1st or 2nd class Honours degree in physics or a relevant subject
• Relevant accredited MSc or higher degree
• HCPC registration as a Clinical Scientist
• RPA2000 certification as a Medical Physics Expert in nuclear medicine physics
• Either RPA or RWA of working towards within agreed time frame
• PhD in nuclear medicine physics or a related area
Knowledge and Experience
• Post Registration clinical experience in Nuclear Medicine Physics
• Experience of acting as a Medical Physics Expert in nuclear medicine physics.
• Experience in supervising a team within a scientific/clinical environment
• Expert theoretical and practical knowledge of nuclear medicine equipment
• Expert theoretical and practical knowledge of molecular radiotherapy in a clinical environment.
• Expert knowledge of radiation protection, able to act as a Trust expert in area of nuclear medicine and advise on radiation protection.
• High level of understanding of patient and staff risks arising from ionising radiations
• Awareness of leadership and management procedures and practices.
• In-depth understanding of relevant legislation, national standards, professional and other guidelines [e.g. IRR, IR(ME)R, ISO 9001 , RIDDOR, NAIR, COSHH, EPR, MDA/MHRA guidance, HASS]
• Knowledge and experience of quality systems
• Experience of provision of Radiation Protection Advice for areas outside of Nuclear Medicine.
Skills
• Able to communicate complex information to a variety of audiences (external regulators, managers and multi-disciplinary teams for example) in a variety of situations (conferences, Trust-wide and local meetings for example)
• Able to understand and manage a budget and prepare effective business cases
Attributes
• Evidence of presentation of scientific papers at national and international conferences
• Able to deliver teaching and training on complex subjects to others and to assess learning and competency appropriately.
• Flexible, able to adjust commitments when required and work to tight deadlines
• High degree of physical accuracy and dexterity, for making precision measurements and equipment adjustments using fine tools.
Disclosure and Barring Service Check
This post is subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975 and as such it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service (formerly known as CRB) to check for any previous criminal convictions.
£58,972 to £68,525 a yearper annum pro rata
#J-18808-Ljbffr Show more details...
Radiation Physics are recruiting a Deputy Head of Nuclear Medicine Physics. We are looking for an experienced person in nuclear medicine imaging and molecular radiotherapy to lead our busy molecular radiotherapy service...
The successful candidate will be an HCPC registered clinical scientist, a certificated MPE with extensive relevant experience. We are looking for someone who could act as an RPA or RWA however support will be given for promising individuals to obtain one or more of these within an agreed timeframe.
We provide a clinical, scientific and technical service to the Diagnostic and Oncology Directorates of the Maidstone and Tunbridge Wells NHS Trust at both Maidstone and Tunbridge Wells sites and to other Departments of the Trust as required. The Section provides a Molecular Radiotherapy Service and provision for support to PET-CT.
The department provides training across all disciplines and levels. The department supports staff undertaking HSST, STP and RCT (and equivalences) or working towards professional certifications.
There may be opportunities to be involved in Radiation Safety activities across the wider Radiation Physics group should the post holder be interested in this."
Main duties of the job
The post holder will work alongside the Nuclear Medicine Physics team to ensure that all radiation practices within the Nuclear Medicine Departments at MTW comply with regulatory requirements, national guidance and best practice.
They will use their own professional judgement when providing complex, wide-ranging expert advice to clinical staff on the optimisation of patient imaging, quality assurance, radiation dosimetry, radiation safety and the interpretation of scientific results. The highly-specialist, complex and advanced nature of this expert advice may mean that there is no immediate recourse to another clinical scientist.
In particular, the post holder will be expected to lead the molecular radiotherapy programme, including running the established services (which currently routinely includes Ra-223 Xofigo, I-131 ablation and thyrotoxicosis therapies, and occasional Lu-177 Dotatate with a view to establishing a Lu-177 PSMA service in the near future) and working with the Head of Nuclear Medicine Physics and Head of Radiation Physics where required to continually develop the services, including introduction of novel therapies where appropriate.
About us
Maidstone and Tunbridge Wells NHS Trust is a large acute hospital Trust in the county of Kent.
The Trust provides a full range of general hospital services and some areas of specialist complex care to around 760,000 people living in the south part of West Kent and the north part of East Sussex.
The Trust's core catchment areas are Maidstone and Tunbridge Wells and their surrounding boroughs. We work from two main clinical sites: Maidstone Hospital and Tunbridge Wells Hospital at Pembury. Tunbridge Wells Hospital opened in 2011 and provides single rooms with en-suites for all in-patients - the first of its kind in the country.
We employ more than 7,000 full and part-time staff in a huge range of clinical and non-clinical roles across both of our hospital sites.
Job responsibilities
Once your pre-employment checks have been completed you will be contacted by Recruitment to arrange your start date which will be in line with one of our Corporate Inductions.
Please note that appointment to this post will be subject to a satisfactory Disclosure & Barring Service Check at StandardLevel. (Enhanced level now includes regulated checks against vulnerable adults and children)
At MTW, we seek to develop a culture where everyone can reach their full potential with opportunities to grow and develop their career. We recognise and value the unique contributions that each of our staff bring, delivering the best quality care and service to our patients. We are committed to being a diverse employer and strive to reflect everyone in our local communities. We welcome applications from people of diverse backgrounds, perspectives and experiences and celebrate the diversity of thought, viewpoints and ideas that will make our Trust the best place to work.
Interview Date: To be confirmed
Person Specification
Qualifications
• 1st or 2nd class Honours degree in physics or a relevant subject
• Relevant accredited MSc or higher degree
• HCPC registration as a Clinical Scientist
• RPA2000 certification as a Medical Physics Expert in nuclear medicine physics
• Either RPA or RWA of working towards within agreed time frame
• PhD in nuclear medicine physics or a related area
Knowledge and Experience
• Post Registration clinical experience in Nuclear Medicine Physics
• Experience of acting as a Medical Physics Expert in nuclear medicine physics.
• Experience in supervising a team within a scientific/clinical environment
• Expert theoretical and practical knowledge of nuclear medicine equipment
• Expert theoretical and practical knowledge of molecular radiotherapy in a clinical environment.
• Expert knowledge of radiation protection, able to act as a Trust expert in area of nuclear medicine and advise on radiation protection.
• High level of understanding of patient and staff risks arising from ionising radiations
• Awareness of leadership and management procedures and practices.
• In-depth understanding of relevant legislation, national standards, professional and other guidelines [e.g. IRR, IR(ME)R, ISO 9001 , RIDDOR, NAIR, COSHH, EPR, MDA/MHRA guidance, HASS]
• Knowledge and experience of quality systems
• Experience of provision of Radiation Protection Advice for areas outside of Nuclear Medicine.
Skills
• Able to communicate complex information to a variety of audiences (external regulators, managers and multi-disciplinary teams for example) in a variety of situations (conferences, Trust-wide and local meetings for example)
• Able to understand and manage a budget and prepare effective business cases
Attributes
• Evidence of presentation of scientific papers at national and international conferences
• Able to deliver teaching and training on complex subjects to others and to assess learning and competency appropriately.
• Flexible, able to adjust commitments when required and work to tight deadlines
• High degree of physical accuracy and dexterity, for making precision measurements and equipment adjustments using fine tools.
Disclosure and Barring Service Check
This post is subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975 and as such it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service (formerly known as CRB) to check for any previous criminal convictions.
£58,972 to £68,525 a yearper annum pro rata
#J-18808-Ljbffr Show more details...
via ZipRecruiter
schedule_type: Full-time
Requisition Number: 235499
Position Title...
External Description:
Job Title: PATIENT CARE ASST
Job Summary
• Provides direct and indirect patient care duties under the guidance and direction
of the Registered Nurse. Responsible for implementing components of the plan
of care based on physical, psychosocial and spiritual needs. Provides comfort,
safety and emergency measures; activities of daily living: personal care needs,
nutritional and
Requisition Number: 235499
Position Title...
External Description:
Job Title: PATIENT CARE ASST
Job Summary
• Provides direct and indirect patient care duties under the guidance and direction
of the Registered Nurse. Responsible for implementing components of the plan
of care based on physical, psychosocial and spiritual needs. Provides comfort,
safety and emergency measures; activities of daily living: personal care needs,
nutritional and elimination needs. Measures vital signs, performs ECGs, and
capillary blood glucose needs. Observes and reports the functioning of
equipment, the results of treatments, condition of dressings and any change in
patient condition. Incorporates the concepts of the Hospital's Customer Service
Program into all aspects of patient care activities (i.e. confidentiality,
responsiveness, caring). Accountable to the Nurse Manager or designee for all
activities. Adheres to policies and procedures of the department. If certification is
not present at hire employee must successfully complete the onsite nursing
certification program within 90 days of hire.
Education
• High School Diploma or Equivalent (Required)
• Other: Nursing Assistant or Medical Assistant Program or completion of at least
one clinical rotation in an accredited Nursing program (Preferred)
Licenses and Certifications
• BLS - Basic Life Support (Required)
• CMA - Certified Medical Assistant (Preferred)
• CNA - Certified Nursing Assistant (Preferred)
Experience
• 1 Year experience in a patient care role (Preferred)
Required Skills
• Analytical Skills
• Customer Service Skills
• Medical Terminology
• Strong Communication Skills
• Strong Interpersonal Skills
General Responsibilities
• Complies with all Temple University Health System policies and procedures, and
all applicable accreditation standards, laws and regulations, including those
regarding patient confidentiality such as, but not limited to, Health Insurance
Portability and Accountability Act of 1996, P. L. 104-191 ('HIPAA') and the rules
and regulations implemented hereunder.
City: Philadelphia
State: Pennsylvania
Community / Marketing Title: PATIENT CARE ASST- 8B-Medical Surgical- 40HR Night Shift
Company Profile:
EEO Employer Verbiage:
Location_formattedLocationLong: Philadelphia, Pennsylvania US
Job Number: 72464 Show more details...
Position Title...
External Description:
Job Title: PATIENT CARE ASST
Job Summary
• Provides direct and indirect patient care duties under the guidance and direction
of the Registered Nurse. Responsible for implementing components of the plan
of care based on physical, psychosocial and spiritual needs. Provides comfort,
safety and emergency measures; activities of daily living: personal care needs,
nutritional and elimination needs. Measures vital signs, performs ECGs, and
capillary blood glucose needs. Observes and reports the functioning of
equipment, the results of treatments, condition of dressings and any change in
patient condition. Incorporates the concepts of the Hospital's Customer Service
Program into all aspects of patient care activities (i.e. confidentiality,
responsiveness, caring). Accountable to the Nurse Manager or designee for all
activities. Adheres to policies and procedures of the department. If certification is
not present at hire employee must successfully complete the onsite nursing
certification program within 90 days of hire.
Education
• High School Diploma or Equivalent (Required)
• Other: Nursing Assistant or Medical Assistant Program or completion of at least
one clinical rotation in an accredited Nursing program (Preferred)
Licenses and Certifications
• BLS - Basic Life Support (Required)
• CMA - Certified Medical Assistant (Preferred)
• CNA - Certified Nursing Assistant (Preferred)
Experience
• 1 Year experience in a patient care role (Preferred)
Required Skills
• Analytical Skills
• Customer Service Skills
• Medical Terminology
• Strong Communication Skills
• Strong Interpersonal Skills
General Responsibilities
• Complies with all Temple University Health System policies and procedures, and
all applicable accreditation standards, laws and regulations, including those
regarding patient confidentiality such as, but not limited to, Health Insurance
Portability and Accountability Act of 1996, P. L. 104-191 ('HIPAA') and the rules
and regulations implemented hereunder.
City: Philadelphia
State: Pennsylvania
Community / Marketing Title: PATIENT CARE ASST- 8B-Medical Surgical- 40HR Night Shift
Company Profile:
EEO Employer Verbiage:
Location_formattedLocationLong: Philadelphia, Pennsylvania US
Job Number: 72464 Show more details...
via Salary.com
posted_at: 22 days agoschedule_type: Full-time
Current employees on the NTWP program need not apply to this requisition.
This requisition is for individuals interested in employment with V2X after the transition, after September 1...
Electronics Technician III (AV-8B)
Description: Services, repairs, and overhauls aircraft electronic and electrical systems. Troubleshoots repairs, removes and replaces aircraft wiring and connectors, Weapons Replaceable Assemblies (WRAS), and Shop Replaceable
Current employees on the NTWP program need not apply to this requisition.
This requisition is for individuals interested in employment with V2X after the transition, after September 1...
Electronics Technician III (AV-8B)
Description: Services, repairs, and overhauls aircraft electronic and electrical systems. Troubleshoots repairs, removes and replaces aircraft wiring and connectors, Weapons Replaceable Assemblies (WRAS), and Shop Replaceable Assemblies (SRAs) by appropriate governing instructions and maintenance manuals utilizing hand tools, power tools, electronic test equipment, and associated materials. Reads and interprets aircraft wiring diagrams, schematics, manufacturer's publications, maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Analyzes weapons control and release systems for proper functioning and repairs or replaces components to ensure proper weapons control and release functions. Maintains all aircraft electrical and electronic systems including power distribution, compass, global positioning system, communications, navigation, radar, computer, integrated weapons delivery, fire control, and others that may be installed in assigned aircraft. Applies advanced technical knowledge to solve usually complex problems and identify failed components. Performs miscellaneous duties to service aircraft systems. As directed by site operations and site management specifications, be certified as a CDI.
Qualifications: The candidate must have completed a Navy Class A school for Aviation Electricians or Aviation Electronics Technicians, or USMC/USCG equivalent and a Navy Class C school in electrical or electronics repair for the position-specific T/M/S aircraft, or USMC/USCG equivalent. (Five years of organizational level experience on the applicable position-specific T/M/S aircraft may be substituted for the Class "C" school.) Must have a minimum of ten (10) years of experience in Organizational Level avionics maintenance in similar T/M/S aircraft. Two of the three years of type/model experience within the last two years is preferred. Must be able to draw, load, and maintain the physical security of all associated Communications Security (COMSEC) equipment for the position-specific T/M/S aircraft. Must have a valid driver's license and be eligible to qualify for and able to maintain a secret level clearance.
Duties: The candidate for this task is required to maintain and service the applicable aircraft electrical and electronic systems/components as required in support of the Air Test
and Evaluation Squadron 31 RDT&E Programs by applicable publications and governing instructions
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c Show more details...
This requisition is for individuals interested in employment with V2X after the transition, after September 1...
Electronics Technician III (AV-8B)
Description: Services, repairs, and overhauls aircraft electronic and electrical systems. Troubleshoots repairs, removes and replaces aircraft wiring and connectors, Weapons Replaceable Assemblies (WRAS), and Shop Replaceable Assemblies (SRAs) by appropriate governing instructions and maintenance manuals utilizing hand tools, power tools, electronic test equipment, and associated materials. Reads and interprets aircraft wiring diagrams, schematics, manufacturer's publications, maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Analyzes weapons control and release systems for proper functioning and repairs or replaces components to ensure proper weapons control and release functions. Maintains all aircraft electrical and electronic systems including power distribution, compass, global positioning system, communications, navigation, radar, computer, integrated weapons delivery, fire control, and others that may be installed in assigned aircraft. Applies advanced technical knowledge to solve usually complex problems and identify failed components. Performs miscellaneous duties to service aircraft systems. As directed by site operations and site management specifications, be certified as a CDI.
Qualifications: The candidate must have completed a Navy Class A school for Aviation Electricians or Aviation Electronics Technicians, or USMC/USCG equivalent and a Navy Class C school in electrical or electronics repair for the position-specific T/M/S aircraft, or USMC/USCG equivalent. (Five years of organizational level experience on the applicable position-specific T/M/S aircraft may be substituted for the Class "C" school.) Must have a minimum of ten (10) years of experience in Organizational Level avionics maintenance in similar T/M/S aircraft. Two of the three years of type/model experience within the last two years is preferred. Must be able to draw, load, and maintain the physical security of all associated Communications Security (COMSEC) equipment for the position-specific T/M/S aircraft. Must have a valid driver's license and be eligible to qualify for and able to maintain a secret level clearance.
Duties: The candidate for this task is required to maintain and service the applicable aircraft electrical and electronic systems/components as required in support of the Air Test
and Evaluation Squadron 31 RDT&E Programs by applicable publications and governing instructions
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c Show more details...
Norton safe Web